Always disconnect operator from door before programming
to avoid injury to yourself or the operator
CodeDodger Keypad (new style)
Erase old PIN number by pressing and holding in order
 Press and release the following buttons
Enter your 4 digit PIN number & press
Follow the antenna wire to the motor head, the Learn Code button will be within an inch of the antenna wire.
Press the Learn Code button &immediately go to the keypad & enter your PIN number & press
 Wait 30 seconds (or until keypad light goes off) & enter your PIN number and
FOR MULTIPLE DOORS
Enter your PIN No and press:
 Enter number of doors to control:
 &
Go to door 1 & press the Learn Code button
Enter your PIN No &
 Go to door 2 & press the Learn Code button
Enter your PIN No &
 Go to door 3 & press the Learn Code button
Enter your PIN No &
 Enter PIN No &
 or 
WAIT 30 SECONDS AND TRY YOUR CODE
| 
